Infinity Cutting Tools 7-pc. Professional Router Bit Set (00-113)
However you store your router bits, I’m sure there are a few that are the easiest to reach because you use them more often than the others. And I’ll just bet that the 7 router bits you use the most are the same ones included in the Infinity Tools 7-pc. Professional Router Bit Set (00-113).
As the graphic below shows, you can get a multitude of profiles and uses from this set of router bits. Each bit features a 1/2″-dia. shank and micro-grain carbide cutting edges for the smoothest cut and lasting sharpness. The set comes complete in a handy storage box.
Infinity Tools 7-pc. Professional Router Bit Set (00-113)
The roundover bits (1/2″-rad. and 3/8″-rad.) not only ease the sharp edges of workpieces, but you can set the depth to create a small step, or fillet, to create a common, decorative profile.
Infinity Cutting Tools 1/2″ Rounder Bit (38-880)
Infinity Cutting Tools 3/8″ Rounder Bit (38-817)
The 3/4″-dia. straight bit is great for cutting dadoes and grooves, as well as rabbets, for a lot of joinery options. At the router table, you can use the straight bit to cut tenons, tongues, half-lap joints, and other versatile options. With the included bearing, you can turn this bit into a pattern bit.
Infinity Cutting Tools 3/4″ Straight Bit with Bearing (12-690B)
The cove bit is handy for a lot of operations, as well. Besides the obvious use of making a cove cut along the edge of a workpiece to create a molding, you can create stacked molding using the cove bit in combination with the roundover bits to create a variety of classic profiles.
Infinity Cutting Tools 1/2″ Cove Bit (37-850)
The chamfer bit is great for creating shadow lines along the edges of a workpiece to add visual interest to your finished project.
Infinity Cutting Tools Chamfer Bit (36-920)
And no woodworking shop is complete without a flush-trim bit and a pattern bit. From cutting odd-shaped workpieces using templates to trimming shelf edging flush, this pair of bits is a must-have.
Infinity Cutting Tools Flush Trim Bit (06-627)
Our 7-pc. set not only includes a rabbeting bit, it also includes a set of bearings that allow you to create rabbets in up to six different widths and convert the straight bit to a pattern bit. You won’t find this in a lot of router bit sets from our competitors.
Infinity Cutting Tools 7-pc. Bearing Set (RB-155)
So you see, with the inclusion of the bearings, this router bit set is really a lot more than 7 pieces. And when you buy the set, you’re saving over $60 than if you buy all of the pieces individually. However you add it up, it’s a good value for the highest quality router bits, so order yours today.
