Infinity Cutting Tools has a saw blade in their inventory that a lot of folks don’t understand. We call it the 10″ Multi-Material, 80-tooth saw blade. It was originally designed to cut materials like melamine (which is prone to chipout) and non-ferrous metals like brass and aluminum. But it can do so much more. (Perhaps we should rename it.)
There are a couple of things that make this blade different than your run-of-the-mill combination, crosscut, or rip blade. First off, every tooth on the blade is a Triple-Chip Grind (TCG). This tooth configuration is designed so that each tooth takes a smaller bite without “grabbing” the material. It’s common in industrial shops.
The Infinity 010-380 Multi-Material blade features a negative hook angle and a triple-chip grind.
The triple-chip grind also means you’ll get less tearout and chipping on the material as the blade exits the cut. This is particularly important when working with melamine-coated sheet goods and cabinet-grade plywood with its paper-thin veneers.
Secondly, the teeth have a negative rake angle. This means that each tooth creates more of a shearing cut than blades with a positive rake angle. This, in combination with having 80 teeth, results in a smoother cut.
The higher tooth count and negative rake angle make this blade behave a little differently than your typical, aggressive saw blade. Because there are many teeth, you can’t feed the material into the blade as fast as you might be used to. And you’ll want to keep the blade height pretty low (about half a tooth above the material) so that the teeth are cutting at a lower shear angle rather than the “chopping” action of a highly elevated blade.
I’ve cut all sorts of material with this blade including MDF, aluminum, and plywood. If you’re looking for the ultimate edge, particularly with MDF, this blade really shines.
Another great application for this blade is your miter saw or radial arm saw. The negative hook angle makes it ideal for these applications. You won’t be disappointed in the quality of cross-grain cuts in hardwood and softwood using this blade.
